Ridge flashing
Ridge flashings are designed to ensure a tight seal along the ridge, which is the line formed by the intersection of roof slopes with opposing inclinations..
Flashing type 102 and sealing gasket UD42 have been specifically adapted to match the unique trapezoidal profile of the upper cladding of Paneltech roofing panels. Our product range includes both upper and lower ridge flashings, available in sheet metal thicknesses of 0.50 mm or 0.75 mm.
FLASHING 101 – Upper Ridge Flashing
| Symbol/panel thickness | A | L | area | slope angle |
| 101/150/α | 150 | 3000 5000 6000 |
330 | α < 6° |
| 101/180/α | 180 | 390 | α < 11° | |
| 101/200/α | 200 | 430 | α < 15° | |
| 101/250/α | 250 | 530 | α < 23° |
α – slope angle
α1 = 180 – 2α
FLASHING 103 – lower Ridge Flashing
| Symbol/panel thickness | A | L | area |
| 103/50/α | 50 | 3000 5000 6000 |
130 |
| 103/100/α | 100 | 230 | |
| 103/200/α | 200 | 430 |
Typical steel sheet thickness 0,50 mm
Untypical steel sheet thickness 0,50 mm or 0,75 mm
103 / A ……. / α ……
α – slope angle
available colors
- RAL colors compatible with sandwich panels coatings – flashings 0.50 – 0.75 mm thick;
- any RAL colors – flashings 0.50 – 2.00 mm thick powder-coated;
- unpainted galvanized – flashings 0.75 – 2.00 mm thick;
- non-painted stainless steel – 0.80 and 1.50 mm thick flashings.
RAL 9002
RAL 9010
RAL 9001
RAL 9006
RAL 1015
RAL 7035
RAL 1002
RAL 1021
RAL 3000
RAL 3011
RAL 5010
RAL 5012
RAL 6029
RAL 7016
RAL 7024
RAL 7040
RAL 8017
RAL 9007