Gutter Z-bars
Gutter Z-Profiles are flashings featuring a vertical surface that allows for the installation of standard fascia-mounted gutter brackets.
They enable the secure mounting of gutters. We offer Z-profiles made of 1.50 mm or 0.75 mm sheet metal.
Flashing 130 – Gutter Z-Profile
| Symbol/panel thickness | D | C | L | area |
| 130/40/α* | 40 | 50 | 3000 5000 6000 |
130+x |
| 130/60/α* | 60 | 50 | 250+x | |
| 130/80/α* | 80 | 50 | 170+x | |
| 130/90/α* | 90 | 50 | 180+x | |
| 130/100/α | 100 | 50 | 190+x | |
| 130/120/α | 120 | 50 | 210+x | |
| 130/140/α | 140 | 50 | 230+x | |
| 130/150/α | 150 | 50 | 240+x | |
| 130/160/α | 160 | 50 | 250+x | |
| 130/180/α | 180 | 50 | 270+x | |
| 130/200/α | 200 | 50 | 290+x |
Typical unpainted steel sheet, thickness 1,50 mm
Untypical steel sheet painted (RAL 9010), thickness 1,50 mm
130 / A ……. / C ……. / α ……
α – slope angle, α1 = 90 – α
D – panel core thickness, x – addition depending on α angle
With roof inclination >10°, according to panel thickness,
extend section C
* – not recommended for panel thickness D=40-90mm
Flashing 131 – Extended Gutter Z-Profile
| Symbol/panel thickness | D | B | C | L | area |
| 131/40/α | 40 | 70 | 50 | 3000 5000 6000 |
285+x |
| 131/60/α | 60 | 50 | 50 | 265+x | |
| 131/80/α | 80 | 30 | 50 | 245+x | |
| 131/90/α | 90 | 30 | 50 | 255+x | |
| 131/100/α | 100 | 30 | 50 | 265+x | |
| 131/120/α | 120 | 30 | 50 | 285+x | |
| 131/140/α | 140 | 30 | 50 | 305+x | |
| 131/150/α | 150 | 30 | 50 | 315+x | |
| 131/160/α | 160 | 30 | 50 | 325+x | |
| 131/180/α | 180 | 30 | 50 | 345+x | |
| 131/200/α | 200 | 30 | 50 | 365+x |
Typical steel sheet thickness 0,75 mm
(RAL 7016, 7035, 8017, 9002, 9010, 9006)
Untypical steel sheet thickness 0,75 mm
(RAL 7035, 8017, 9002, 9010, 9006)
131 / A ……. / B ……. / C ……. / α ……
α – slope angle, α1 = 90 – α, α2 = 90 + α
D – panel core thickness, x – addition depending on α angle
With roof inclination >10 °, according to panel thickness,
extend section C
available colors
- RAL colors compatible with sandwich panels coatings – flashings 0.50 – 0.75 mm thick;
- any RAL colors – flashings 0.50 – 2.00 mm thick powder-coated;
- unpainted galvanized – flashings 0.75 – 2.00 mm thick;
- non-painted stainless steel – 0.80 and 1.50 mm thick flashings.
RAL 9002
RAL 9010
RAL 9001
RAL 9006
RAL 1015
RAL 7035
RAL 1002
RAL 1021
RAL 3000
RAL 3011
RAL 5010
RAL 5012
RAL 6029
RAL 7016
RAL 7024
RAL 7040
RAL 8017
RAL 9007