Roof and Slope Cover Trims
FLASHING 109 – Flashing 109 – Roof Cover Trim
| Symbol | A | B | L | area |
| 109/60/α | 60 | 100 | 3000 5000 6000 |
190 |
| 109/80/α | 80 | 100 | 210 |
Typical steel sheet thickness 0,50 mm
Untypical steel sheet thickness 0,50 mm or 0,75 mm
109 / A ……. / B …… / α ……
α – slope angle
α1 = 105 + α
FLASHING 114 – Slope Cover Trim (Connection to Wall Sandwich Panel)
| Symbol | A | B | L | area |
| 114/100/α | 150 | 100 | 3000 5000 6000 |
280 |
| 114/1500/α | 150 | 150 | 330 | |
| 114/200/α | 150 | 200 | 380 | |
| 114/250/α | 150 | 250 | 430 | |
| 114/300/α | 150 | 300 | 480 |
Typical steel sheet thickness 0,50 mm
Untypical steel sheet thickness 0,50 mm or 0,75 mm
114 / A ……. / B …… / α ……
α – slope angle
α1 = 90 + α
α = 0 – for the flashing situated along the slope
Flashing 115 – Slope Cover Trim (Connection to Masonry Wall)
| Symbol | A | B | L | area |
| 115/100/α | 150 | 100 | 3000 5000 6000 |
275 |
| 115/1500/α | 150 | 150 | 325 | |
| 115/200/α | 150 | 200 | 375 | |
| 115/250/α | 150 | 250 | 425 | |
| 115/300/α | 150 | 300 | 475 |
Typical steel sheet thickness 0,50 mm
Untypical steel sheet thickness 0,50 mm or 0,75 mm
115 / A ……. / B …… / α ……
α – slope angle
α1 = 90 + α
α = 0 – for the flashing situated along the slope
Flashing 116 – Slope Cover Trim (Connection to Wall Sandwich Panel)
| Symbol | A | B | L | area |
| 116/100/α | 110 | 100 | 3000 5000 6000 |
245 |
| 116/1500/α | 110 | 150 | 295 | |
| 116/200/α | 110 | 200 | 345 | |
| 116/250/α | 110 | 250 | 395 | |
| 116/300/α | 110 | 300 | 445 |
Typical steel sheet thickness 0,50 mm
Untypical steel sheet thickness 0,50 mm or 0,75 mm
116 / A ……. / B ……
Flashing 117B – Slope Cover Trim (Connection to Wall Sandwich Panel)
| Symbol | A | B | C | D | α ° | L | area |
| 117/100/α | 50 | 110 | 42 | 100 | 90 | 3000 5000 6000 |
332 |
| 117/1500/α | 50 | 110 | 42 | 150 | 90 | 382 | |
| 117/200/α | 50 | 110 | 42 | 200 | 90 | 432 | |
| 117/250/α | 50 | 110 | 42 | 250 | 90 | 482 | |
| 117/300/α | 50 | 110 | 42 | 300 | 90 | 532 |
Typical steel sheet thickness 0,50 mm
Untypical steel sheet thickness 0,50 mm or 0,75 mm
117B / A ……. / B …… / C …… / D …… / α ……
available colors
- RAL colors compatible with sandwich panels coatings – flashings 0.50 – 0.75 mm thick;
- any RAL colors – flashings 0.50 – 2.00 mm thick powder-coated;
- unpainted galvanized – flashings 0.75 – 2.00 mm thick;
- non-painted stainless steel – 0.80 and 1.50 mm thick flashings.