SANDWICH PANEL PWPIR-CH
Cooldroom PWPIR-CH sandwich panel is intended for warehouse structures where internal temperatures reach minus 25°C.
The panel can be installed both vertically and horizontally. Panel edges are custom-cut, and thus provide a very low coefficient of linear distribution of thermal conductivity of the joint, and thus guarantee complete water-tightness and vapor-tightness.
APPLICATION OF PWPIR-CH PANELS
- Industrial buildings,
- Coldrooms and freezers,
- Store houses,
- Food industry facilities,
- Agricultural objects.
MORE ABOUT PANELS
- PARAMETERS
- technical drawings
- AVAILABLE PROFILATION TYPES
- AVAILABLE COLORS
- AVAILABLE PROTECTIVE COATINGS
- DOWNLOAD
TABLE OF TECHNICAL PARAMETERS OF THE PWPIR-CH PANELS
| thickness [mm] | 120 | 160 | 180 | 200 |
| modular width [mm] | 1130 (optionally 1000 or 10501)) | |||
| length2) [mm] | 2000 ÷ 15800 | |||
| weight3) [kg/m2] | 13,10 | 14,70 | 15,50 | 16,30 |
| heat transfer coefficient Uc [W/m2K] | 0,18 | 0,14 | 0,12 | 0,11 |
| acoustic insulation Rw [dB] | 26 | |||
| reaction to fire | B-s1,d0 | |||
| wall resistance to external fire4) | NRO | |||
| wall fire rating 5) | EI 30 (o<->i)5) | |||
| anti-corrosive protection | external C1, C2, C3 (C4 ÷ C5)6) , internal A1 (A2 ÷ A5)6) | |||
| organic coatings | SP 25, PU, AGRO, FOOD SAFE and other6) | |||
| external facing | galvanized sheet 0,5 ÷ 0,6 mm7) | |||
| internal facing | galvanized sheet 0,4 ÷ 0,5 mm7) | |||
| available profiles | external facing L, ML, MF, MR8), G9), C ; internal facing L, R9), G9) | |||
| insulating core | rigid foam of 40 kg/m3 in total density and with enclosed PIR (polyisocyanurate) cells | |||
| application | non-continuous application on external walls and as wall cladding, on the structural parts of walls and ceilings | |||
| wall application layout | vertical or horizontal | |||
1) Minimum Production Quantity (MPQ) for modular width 1050 mm is 1000m2 and depends on thickness of the panel. In order to verify production possibilities of specific order please contact our Customer Service or Sales Representative.
2) length depends on the color of the external facing and the thickness of the panel
3) average weight of a sandwich panel with 0.5 mm outer facing, including product tolerance
4) fire rating concerning the propagation of fire by the wall when the fire acts towards the outside. This property applies to the Polish territory only and is not CE-marked.
5) for more details on the General Terms of Sale and Delivery, go to www.paneltech.pl
6) organic coat selected on the basis of durability and application conditions. Coat selection is carried out through environmental assessment and basing on an environmental questionnaire completed by the Client, approved by the steel manufacturer and Paneltech
7) other steel types are selected according to application conditions and approved by Paneltech
8) detailed information on the MR – microgroove facing type will be provided at individual request
9) panels with G – smooth or R – groove facing may include micro-waving, which can affect the aesthetic appeal< of the product which is classified as fully compliant with EN 14509, annex D
2) length depends on the color of the external facing and the thickness of the panel
3) average weight of a sandwich panel with 0.5 mm outer facing, including product tolerance
4) fire rating concerning the propagation of fire by the wall when the fire acts towards the outside. This property applies to the Polish territory only and is not CE-marked.
5) for more details on the General Terms of Sale and Delivery, go to www.paneltech.pl
6) organic coat selected on the basis of durability and application conditions. Coat selection is carried out through environmental assessment and basing on an environmental questionnaire completed by the Client, approved by the steel manufacturer and Paneltech
7) other steel types are selected according to application conditions and approved by Paneltech
8) detailed information on the MR – microgroove facing type will be provided at individual request
9) panels with G – smooth or R – groove facing may include micro-waving, which can affect the aesthetic appeal< of the product which is classified as fully compliant with EN 14509, annex D
The profiling of sandwich panel is intended to emphasize aesthetic values as well as increase stiffness. Depending on the type of panel, various variants of profiling are available on both sides. The depth of profiling is approximately 1 mm. The exception is the external facing of the roof panels, which has an individual trapezoidal T profile, approximately 2 mm deep.
AVAILABLE EXTERNAL PROFILATION:
L – linear
MF – microwave
ML – microlinear
MR – microgroove
G – smooth
C – carbon
AVAILABLE INTERNAL PROFILATION:
L – linear
R – groove
G – smooth
External facings of Paneltech sandwich panels are available in a wide range of colors consistent with the RAL color system. The offer of SP 25 polyester linings is divided into standard, typical and untypical colors.
STANDARD COLORS
RAL 9002
RAL 9010
RAL 9001
RAL 9006
RAL 1015
RAL 7035
TYPICAL COLORS
RAL 1002
RAL 1021
RAL 3000
RAL 3011
RAL 5010
RAL 5012
RAL 6029
RAL 7016
RAL 7024
RAL 7040
RAL 8017
RAL 9007
UNTYPICAL COLORS
RAL 1018
RAL 8004
food safe
RAL 6011
RAL 6005
RAL 2011
TABLE OF COATING PROPERTIES
| NAME | TYPE | THICKNESS [μm] | CORROSION RESISTANCE |
APPLICATION | SURFACE FINISHING2) |
| SP25 | polyester | 25 | C1-C3, A1 | common | smooth |
| PU | polyurethane | 35-60 | conditionally C51), A41) | environment with increased corrosion class | smooth with shine |
| FARM | polyester | 35 | conditionally C3, A1 | from inside of buildings (no UV-resistance), agricultural buildings, high resistance to ammonia | mooth |
| FOOD SAFE | PVC laminate | 120 | conditionally C51), A51) | from inside of buildings (no UV-resistance), premises with controlled environmental parameters: cold stores, clean rooms, e.g. meat processing plants |
matt / grainy |
| special | polyvinyl chloride | 200 | conditionally C51), A51) | environment with high corrosion resistance class | scintilla finishing |
| PVDF / polyurethane | 40-65 | conditionally C51), A51) | environment with high corrosion resistance class, high colour fastness | smooth |
1) organic coating is selected on the basis of its durability and application conditions. Coating selection is carried out through environmental assessment based on an environmental questionnaire completed by the Client, approved by the steel manufacturer and Paneltech
